Featured post

Was ist Freemesh?


Freemesh ist ein Projekt, das versucht ein stadtweites Datennetz auf Basis von WLAN-Routern aufzubauen. Dieses Netz soll eine freie Kommunikation innerhalb der ganzen Stadt und, mithilfe von Peerings zu anderen Städten, auch überregional ermöglichen. Um dies zu Erreichen, werden Freemeshnoten (das sind die Router mit den Antennen), von freiwilligen an vielen Orten in der Stadt betrieben. Jedes WLAN-fähige Gerät, also beispielsweise Handy oder Notebook, kann sich in der Nähe eines solchen Knotens mit dem Netz verbinden und darüber mit anderen Teilnehmern kommunizieren. Auch ein Zugang ins Internet steht meistens zur Verfügung.

(English) stable firmware 1.1.2 and new experimental firmware released

Leider ist der Eintrag nur auf Amerikanisches Englisch verfügbar. Der Inhalt wird unten in einer verfügbaren Sprache angezeigt. Klicken Sie auf den Link, um die aktuelle Sprache zu ändern.

We just released our firmware version 1.1.2.
This should fix some stability issues and adds support for ALFA Hornet UB / AP121 / AP121U and TP-Link TL-WA7510N routers.
The latest experimental firmware adds support for Cisco Meraki MR12, MR16, MR62 and MR66 acces points.

neue Firmware Version 1.1

Nur kurz nach der Version 1.0 ist nun die Version 1.1 erschienen welche nun auf Gluon v2016.1.1 basiert.
Neben kleineren Fehlerbehebungen werden nun auch die Modelle TP-Link TL-MR13U v1 und Onion Omega unterstützt.
Diese Version kann nun auch direkt auf Ubiquity Geräten mir AirOS 5.6.x installiert werden, ein Downgrade auf AirOS 5.5.x ist nicht länger notwendig.

firmware version 1.0 released

After a several experimental versions, we finally released the version 1.0 of our firmware.
We are now using Gluon v2016.1 which is based on OpenWrt „Chaos Calmer“ 12.05.
Beside a lot of stability and performance optimisation, this version adds support for a bunch of new routers, for example the TP-Link WR841N v10 and WR1043ND v3. The complete list is available here.

Important: With this release we are switching from IBSS to the 802.11s meshing protocol. This means that routers with an older firmware version cannot communicate ower wifi with a v1.0 firmware router. So please keep this in mind if you have any router that are not directly connected to the internet.

experimental support for WR841N v10 and WR1043ND v3

We released an new experimental firmware version which now supports the latest hardware revision of the popular WR841N router. Also v3 of the WR1043ND is now supported among other models.
The experimental firmware can be found here: http://freemesh.marlow.dk/freemesh-dk/2016.2.2/images/factory/
There are no major issues known in this version. A stable version of this firmware will be probably released in the next week